Common fixes to error codes
Recent Topics

6000/7000 Press

Cause Fuser not set correctly Resolution Make sure that the fuser is set correctly and that the screw on the fuser is tightened into the frame of the machine. Then you will need to follow below to reset the dip switch on the machine. Power the machine… more »
0
replies

10 Jan 2022 11:39 am  
10/01/22  
Cause Fuser high temp error. Resolution Power the machine OFF from the main switch leaving the sub switch ON. Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode. To reset a fuser… more »
0
replies

14 Dec 2021 08:50 am  
14/12/21  
Cause Image processing fault Resolution Power off the printer and the Fiery RIP. Leave both off for 5 minutes, power the Fiery RIP back on Remove the Fiery Cable from the RIP/Printer as per image and turn connections around, reconnect Restart the RIP… more »
0
replies

10 May 2021 08:42 am  
10/05/21  
The code indicates that the fuser is not turning for whatever reason...... As per the image below rotate the green wheel so that the fuser turns at least one full rotation more »
0
replies

23 Sep 2020 07:38 am  
23/09/20  
Cause Paper feed motor abnormality Resolution Make sure no paper is caught in the tray/trays. Recycle the power on the machine, if the error code reoccurs leave the tray open and feed from a different tray, call 01-5676000 to log a service call for the… more »
0
replies

21 Nov 2019 05:38 pm  
21/11/19  
Legend
Discussion topic